ARRC Components

We usually keep all of these in stock. They are usually available in mild steel or 4130 chrome moly. The prices shown include VAT, they do not include postage and packing.  You can buy many of them through our Paypal shop, click here to visit it. Some of the pictures show items plated for display, they are normally supplied un-plated.

There are also complete kits of components to meet common chassis building requirements including

Click the words to go down to the relevant part of the page
These brackets allow for bolt-in tubes in a roll cage, see below for a  typical application.. They are £9 a set plus VAT and shipping. A set consists of a pointy plate (that is one shown on the left side or one on the right side) plus a flat plate (shown in the middle) plus two suitable nuts and bolts to join the two.
Roll cage brackets used in a VW Jetta for removable door bars. Pointy plate on main loop and flat plate on the bar.
These are our standard DZUS style brackets, available from stock.

They all cost £1.20.

These are standard chrome moly threaded inserts to be welded into tubes.

From left to right: 3/8th UNF thread for 5/8th 0.058 wall tube (left and right thread available); 3/8th UNF thread for 3/4 0.058 tube (left and right thread available); 7/16th UNF for 3/4 0.058 tube (left and right thread available); 3/4 UNF for 1 1/4 0.120 tube (left hand thread available).

We also stock Aurora rod ends in suitable sizes to fit.

From left to right: 7/16th UNF thread for 7/8 tube; 1/2 UNF thread for 1 inch 0.058 wall tube (left and right thread available); 5/8th UNF thread for 1 inch 0.058 tube (left and right thread available); 3/4 UNF thread for 1 1/4 inch 0.095 tube (right thread available).

We have inserts suitable for 1 1/4 inch 0.095 and 0.120 wall tube and 1 3/8 inch 0.095 or 0.120 wall tube in left hand thread with a hex as above and right hand thread plain as on the left. These are normally paired on for example a four-link tube.

This is our standard driveshaft loop with pip pins for easy removal. Also shown is our bracket for track locator or A-frame locators.

Loop kit with "quick pins" is £26, price for "pip pins" on application. The track locator bracket is £35.

1 - wheelie bar ends (when folded) £2

2 - ladder bar plate for axle £14 each

3 - master cylinder mount £3.50

4 - suspension inners (in pairs) £4.00

In the middle small tabs for brake lines/fittings and windows, all £1.20

1 - Brake caliper bracket £5

2 - Strut top, will be folded for use £4.50

3 - Motor plate mount £2.50

4 - Bracket 4 above before folding and drilling £1.50

plus other miscellaneous brackets, all £1.50

The “weld-in” clevises shown here are 1/2 inch tube id x 1/4 inch pin, 5/8 inch tube id x 5/16 pin and 7/8 inch tube id by 3/8 inch pin sizes.

We have sizes from 1/2 inch x 1/4 inch to 1 3/4 inch x 5/8 inch.

Prices from £6.50 to £9.00


These washer/spacers are available in 3/8th , 7/16th and 1/2 inch sizes. They are available in stainless steel.

Any size £2.50


These flanges are designed to be used on turbo-charger manifolds to allow them to be build up in sections. They are intended to be used in pairs although the 3 inch/6 hole flange will fit some turbochargers. We can fabricate complete systems for you based on these components.

The flange shown here is intended for 2.5 inch tubes and provided with two bolt holes.

Intended for 3.0 inch tubes and provided with two bolt holes

Intended for 3.0 inch tubes and provided with three bolt holes

Intended for 3.0 inch tubes and provided with six bolt holes



Parachute release kit comprising
  • Cable
  • Lever
  • Chassis bracket
  • Mounting and connecting hardware

Lever end as installed in an ARRC customer car. The lever has been anodised in this installation.

Click here to go back to the top of the page.

Door latch and lock kit comprising
  • catches
  • strikers
  • door cover plates
  • mounting bolts 
  • extension tabs for the lock levers

Lock kit as installed in door, view from outside and down from above through window glass opening.

No internal door handle mechanism fitted yet and installation not finalised in these pictures.

Striker fitted through bodywork onto small bracket welded to main loop of tubular frame chassis.

Click here to go back to the top of the page.

Electric window regulators as fitted to luxury super cars. Kit comes with
  • pair of regulators, as seen
  • switches, not shown
  • wiring, not shown

Seen here in correct orientation for door. Window glass fits in silver coloured horizontal fitting which moves up and down the plated guide.

Adaptable to most situations, please contact us if you wish to check dimensions. Maximum lift, depending on installation, is 23 inches

The picture is pixellated to preserve the anonymity of the model.

Click here to go back to the top of the page.

Machined billet 6082-T6 aluminium Nitrous bottle mounts, suitable for 10 or 15 pound bottles. Shown mounted on stainless display rails which are not included in the kit.

Mounts are at two different heights to hold bottle at a suitable angle when mounted on a flat floor.

Clamps undo completely to allow easy installation and removal of the bottle.

Shown here with sample bottle (not included in the kit) installed.

This shows the rubber inserts which hold the bottle firmly and allow for minor variations in size.

Click here to go back to the top of the page.

This is our standard battery box. It is laser cut from sheet steel, then folded and welded in our workshop. It is supplied with the clamping bracket shown which can be positioned to suit many different sizes of battery. Maximum dimensions for this box 27x19x22 cm (WxDxH)

This shows a typical installation in one of our chassis.

Click here to go back to the top of the page.

Date  05-Sep-2010
Pictures by  Webmaster